The movement and power between the two parallel shafts are transmitted by the meshing between the chain sprockets. It is a forced transmission with meshing properties. Among them, roller chain transmission is widely used. In chain transmission, according to the chain structure No...
Sprockets are widely used in daily life, and there will be problems of this kind in production. Let's take a look at what problems the sprocket will have in the production process?Many problems will occur during the production process, if it is a big question...
Gear transmission is one of the more important forms of mechanical transmission. Gears are the core components of many electromechanical products. As a special type of gears, bevel gears are mainly used to transmit the movement and power between the intersecting shafts. According to the tooth length direction curve …
The use of sprocket is very extensive, so the sprocket needs to be maintained and maintained after being used for a long time. How to do it? 1. The tightness of the sprocket needs to be appropriate, a warm reminder that too tight will increase power consumption, and the shaft will be very accommodating...
If you want to extend the service life of a product, it is indispensable to the maintenance and maintenance of the usual days. Here, I will talk about the maintenance and maintenance of the sprocket. Only by maintaining and maintaining it can it prolong the service life. 1. The tightness of the sprocket should be...
What I want to share with you today is: How to calculate the design of spur bevel gear transmission?If you in front of the screen also want to understand this topic at this time, then quickly and Xiaobian to understand: the bevel gear is used to achieve the same plane between two intersecting axes...
The composition of the bevel gear material: There are many types of mechanical parts. Usually all machines use bevel gears. The strength of the raw materials of this type of bevel gear is very high. Some of the added substances will also involve some industries. of…
Because the sprocket shaft is a slender shaft, the rigidity of the parts is poor, the structure process is not good, and the following problems occur during the machining process due to factors such as cutting force, clamping force, dead weight, and cutting heat.Vibration during machining 1. Radial cutting force and clamping...
Today's editor shares: the tempering of the sprocket should be fully and evenly. If you want to understand this topic, let's get to know it with the editor.For carburized and hardened gears, the tempering should be uniform enough so that the quenched martensite can be completely transformed and can...